Material Science and Engineering
Illuminating perovskite photophysics
Light causes small rapid distortions in solar cell material, affecting how charge carriers behave.
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2023/02/625f98ce7cc38d445b1fa3b7.jpg)
KAUST solar scientists are discovering ways to improve the performance of next-generation solar cells. © 2022 KAUST; Anastasia Serin. https://discovery.kaust.edu.sa/en/article/1232/illuminating-perovskite-photophysics
KAUST solar scientists are discovering ways to improve the performance of next-generation solar cells. © 2022 KAUST; Anastasia Serin. https://discovery.kaust.edu.sa/en/article/1232/illuminating-perovskite-photophysics
A detailed view of how electrical charges behave inside perovskites could guide efforts to improve the performance of next-generation solar cells based on these materials, KAUST research has shown.
When light hits a perovskite, it excites negatively charged electrons and leaves behind positively-charged “holes” within the material’s crystalline structure. These electrons and holes can then move through the perovskite to generate an electrical current. But the charge carriers could also recombine instead, which wastes the energy they carry.
![Professor Frédéric Laquai (left) and postdoc Ming-Cong Wang study perovskite solar cells in the KAUST Solar Center.](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2023/02/625f998e35f5de32b3024f92.jpg)
Professor Frédéric Laquai (left) and postdoc Ming-Cong Wang study perovskite solar cells in the KAUST Solar Center.
© 2022 KAUST; Anastasia Serin.
“The efficiency of perovskite solar cells has been greatly improved in the past decade, but fundamental research on their photophysics is relatively backward,” says Ming-Cong Wang at the KAUST Solar Center, part of the team behind the work. “One of the things that is not clear is how charge carriers behave before recombining.”
Some of the ions that make up the perovskite’s crystal lattice can help to localize electrons and holes in different regions, which prevents them from recombining and prolongs their lives. However, this localization also tends to make the charge carriers less mobile, which may adversely affect the solar cell’s performance. Understanding such effects could help researchers to fine-tune the composition of perovskites and boost their ability to generate electricity from sunlight.
![The team used a form of high-intensity microwaves, called terahertz radiation, to study how the charge carriers moved around in the perovskite solar cell.](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2023/02/625f99ade9fbee44bb0b3e82.jpg)
The team used a form of high-intensity microwaves, called terahertz radiation, to study how the charge carriers moved around in the perovskite solar cell.
© 2022 KAUST; Anastasia Serin.
The team studied two different aspects of charge-carrier behavior in thin films of a promising perovskite known as CsFAMA (a cesium-containing triple-cation mixed halide perovskite). First, they used a series of brief laser pulses to excite the charge carriers and then examine them just a few picoseconds (trillionths of a second) later. They found that as the density of charge carriers increases, it linearly narrows the energy gap that electrons need to vault when they are excited by incoming light. This is different from the behavior of conventional semiconductors, says Wang.
Then the team used a form of high-intensity microwaves, called terahertz radiation, to study how the charge carriers moved around. This showed that as the density of charge carriers increases, they are more likely to stick in a particular location. “Charge carriers are more localized at higher densities,” says Frédéric Laquai, who led the team.
The researchers think that both of these observations have the same root cause. When light hits the perovskite, it can cause small rapid distortions in the lattice of ions that affect the charge carriers’ behavior. Other researchers have very recently observed such lattice fluctuations in perovskites as well, lending support to the findings.
References
- Wang, M., Gao, Y., Wang, K., Liu, J., De Wolf, S. & Laquai, F. Photo-induced enhancement of lattice fluctuations in metal-halide perovskites. Nature Communications 13, 1019 (2022).| article
You might also like
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/08/Mario-Lanza_KD_Aug-2024_HH_T2-768x432.jpg)
Material Science and Engineering
Repurposing memory for ultrafast switches
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/08/Pevroskite-768x432.png)
Material Science and Engineering
Pushing perovskites further
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/07/KD-Qiaoqiang-Gan-Draft-1-768x432.jpg)
Environmental Science and Engineering
Plucking water from the air
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/04/KD_baran-768x432.jpeg)
Electrical Engineering
A shade closer to more efficient organic photovoltaics
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/03/KD-StefaanScience-V6-1-768x432.jpg)
Material Science and Engineering
A tandem approach for better solar cells
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/02/K2050_Xixiang-Zhang-V5-768x432.jpeg)
Material Science and Engineering
High-temperature electrical memories for brain-inspired computation
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2024/01/K2029-Main-Image_crop-768x421.png)
Environmental Science and Engineering
A green polymer film offers climate-friendly cooling
![](https://discovery.kaust.edu.sa/wp-content/uploads/sites/2/2023/11/nature_preview_A-768x1013.jpeg)
Material Science and Engineering